Expert Answers about Airstream RV Waste Valves

• Replacement Grey Water Body/Seals for Bristol Double RV Waste Valves 34466ND13AAR
• The gray water tank valve on the Bristol Double RV Waste Valves part # 34466ND13AAR can be replaced using the Bristol Waste Valve Body for RV Gray Water part # 34439241 or the Valterra Bladex Waste Valve Body for RV Gray Water Tank part # T1001VP. If you just want the seals then that would be the Valterra Bladex RV Waste Valve Seals part # T1001-9VP.
  view full answer...


• Replacing Valves Only On Bristol Double RV Waste Valves 34466ND13AAR
• In regards to the Bristol Double RV Waste Valves part # 34466ND13AAR, you can replace both the black valve section using the Bristol Waste Valve Body for RV Black Water part # 34439240 and the grey valve section using the Bristol Waste Valve Body for RV Gray Water part # 34439241.
  view full answer...


• Replacement Cable for Cable Actuated RV Waste Valve
• The cable itself is not available for the LaSalle Bristol Cable-Actuated RV Waste Valve # 34466N4BB96GM, However, we do carry Valterra products like the Valterra Waste Valve Body w/ Flexible Cable for RV Gray Water Tank # TC172- which do have replacement cables available. If you needed to replace the cable on a Valterra waste valve you would want to use the Valterra Cable with Valve Handle # TC96PB, which can be used with both Valterra and Bladex cable actuated waste valves.
  view full answer...


• Replacement Gray and Black Waste Valve Handles For RV Campers
• Here is a list of the replacement valve handles we currently carry. You will need to match them with the waste valves you have on your 1978 Taurus travel trailer as I am unable to determine what valves came on your camper. Replacement Handle for LaSalle Bristol Cable-Actuated RV Waste Valves Gray # 34490CMA1G, Black # 34490CMA1. Replacement Handle for LaSalle Bristol Waste Valves Gray # 34466IHANDLEGRY, Black # 34466IHANDLE. Replacement Handle for Bladex and Valterra Waste Valves Gray...
  view full answer...


• Replacement Valves for the Double RV Waste Valves Part # T80
• You can replace just the valves on the Double RV Waste Valves part # T80. For the black water you can use the Valterra Bladex Waste Valve Body part # T1003VP and for the grey water tank you can use the Valterra Bladex Waste Valve Body part # T1001VP.
  view full answer...


• Is the Double RV Waste Valves # T80 a Replacement For Airstream Valve Part #601482
• The 601482 number you provided is an Airstream part number. But I was able to locate some information with that number and it looks like it is in fact the Double RV Waste Valves # T80. After comparing the Double RV Waste Valves # T80 to the valve I located using the 601482 number, it looks like Airstream just changed the part number to 601482 and the # T80 is the same waste valve you currently have.
  view full answer...


• Replacement Waste Valve Handles For a Sewer Valve On a 2019 Aerolite Travel Trailer
• You will need to select the correct waste valve handle based on your waste valve. Replacement Handle for LaSalle Bristol Cable-Actuated RV Waste Valves # 34490CMA1 Replacement Handle for LaSalle Bristol Waste Valves # 34466IHANDLE Replacement Handle for Bladex and Valterra Waste Valves # T1003-6NVP
  view full answer...


• Replacement Cap for a Valterra Waste Valve
• We do have the replacement cap for the Valterra Waste Valve for RV Black Water Tank # T50A available. You will want to use the Valterra RV Waste Valve Cap - 3" # T1020.
  view full answer...


• Black Water Waste Valve Recommendation for a 2004 Mckenzie Medallion
• I can definitely help you figure out what replacement valve you need for the black water system on your 2004 Mckenzie Medallion, but I'll need you to take a look at your system first since we don't have any kind of information on what waste valves you need. The black water side of things uses a 3" diameter pipe so you just need to determine whether your replacement valve needs hub or spigot connections. A hub fitting installs over a spigot fitting so you'll be able to tell what you need...
  view full answer...


• Replacement RV Waste Valve Handles
• We have a number of RV waste valve handles available in a range of styles such as the Replacement Handle for LaSalle Bristol Cable-Actuated RV Waste Valves # 34490CMA1G which has a screw or the Replacement Handle for Bladex and Valterra Waste Valves # T1003-6VP as well as a number of other options. I have linked our selection of RV Waste Valve handles for you to check out. Without having more information regarding your waste valve set-up, I do not have any other great suggestions. If...
  view full answer...


• Replacement Gray Water Valve for Valterra System with 2 Inch Diameter Pipe
• We have some options for you. I've got the 2 inch fit you are seeking. I recommend taking a look at the following options to determine the correct fit for your trailer since I don't know what you are connecting to. Valterra Bladex Waste Valve Body for RV Holding Tank - Aluminum Handle - 2" Diameter # T1002VPM Valterra Bladex Waste Valve for RV Holding Tank - 2" Diameter - Hub to Hub # T1002B Valterra Bladex Waste Valve for RV Holding Tank - 2" Diameter - Spigot to Spigot # T1002A Valterra...
  view full answer...


• Recommended Replacement Waste Valves For A 1998 Fleetwood Flair
• If you're wanting to only replace the valves then you just need the Valterra Bladex Waste Valve Body for RV Black Water Tank # T1003VP and Valterra Bladex Waste Valve Body for RV Gray Water Tank # T1001VP. You can just unbolt the old valves from your setup and swap in these new valves for an easy peasy installation.
  view full answer...


• Replacement Seal for Valterra Bladex RV Waste Valve
• For replacement gaskets/seals for the Valterra Bladex RV waste valve your friend has you'd want the part # T1003-7VP that you referenced.
  view full answer...


• Can The Cable On The LaSalle Bristol Cable-Actuated RV Waste Valve For Black Water Tank Be Replaced?
• There is not a way to replace the black water line on the LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank # 34466N4AB96GMA, unfortunately. Since you mentioned that your black water line broke, you're going to have to replace the entire waste valve. We do offer the Replacement Handle for LaSalle Bristol Cable-Actuated RV Waste Valves # 34490CMA1 as a replacement part, should you ever need it.
  view full answer...


• Replacement Seals for 1-1/2 Inch Valterra Bladex Waste Valve
• The Valterra Bladex Waste Valve Body for RV Gray Water Tank - Aluminum Handle - 1-1/2" Diameter # T1001VPM uses replacement seals # T1001-9VP. For your 3 inch valve, you most likely want the Replacement Seals and Hardware for 3" Valterra Waste Valves # T1003-7VP but I can't confirm the fit, so you may just want to use the Valterra Bladex Waste Valve Body for RV Black Water Tank - Aluminum Handle - 3" Diameter # T1003VPM to have a precise fit.
  view full answer...


• T1001VP RV Waste Valve Handle Type
• The Valterra # T1001VP Waste Valve has a threaded on handle, but it will require a vise to hold the rod in place to get the handle to twist off. You may also be interested in the Valterra # TC172 Waste Valve, which is cable operated valve. The 72" cable will give you lots of mounting location options. I have included a link to the valve below.
  view full answer...


• Determining If Double RV Waste Valves # T18C Could Fit 2016 Coachmen Leprechaun
• The Double RV Waste Valves # T18C that you referenced is a very common valve on RVs like yours. Theres a good chance this is what you need. This slips over a 3 inch pipe on the bigger siade and the smaller side slips into the 1-1/2 inch pip.
  view full answer...


• Replacement RV Waste Valve Cable Kit
• I have a solution for you, but there is not a cable only available to attach to an existing handle for an RV waste valve that is cable actuated. You would instead need to replace the entire cable and handle with something like the Valterra Cable with Valve Handle # TC72PB. This assembly has a 72" long cable and is compatible with Valterra or Bladex cable actuated waste valves. If you need a different length cable, I've gone ahead and linked the available kits we have that you can use to...
  view full answer...


• How to Replace Handle on Black Water Dump Valve
• If you're talking about just the handle on your black waste valve then to replace it is actually fairly simple as they typically thread onto the valve. Here are some examples to choose from: - LaSalle Bristol Waste Valves # 34466IHANDLE - LaSalle Bristol Cable-Actuated RV Waste Valves # 34490CMA1 - Bladex and Valterra Waste Valves # T1003-6NVP - Bladex and Valterra Waste Valves # T1003-6VP You'll turn the handle counter-clockwise to remove it and then clockwise to install the new...
  view full answer...


• Replacing Valterra Valve with LaSalle Bristol Cable-Actuated RV Waste Valve
• What I think you are asking is if you can replace within a current system, a valve assembly of one manufacturer with that of another. Yes, the fitment of valve assemblies is industry standard in dimensions. A Valterra 3" can be replaced with a LaSalle Bristol such as the # 34466N4AB72GMA. If you are asking about interchanging individual components within the assembly, we cannot guarantee fitment within that exchange.
  view full answer...